Environmentally Intelligent Design and Manufacturing

Selected past papers:


1-THE USE OF THERMOSYPHON HEAT PIPES TO IMPROVETHE PERFORMANCE OF A CARBON-AMMONIA ADSORPTION REFRIGERATOR (IJECDM, Vol. 9, No. 3, 2000), R. E. CRITOPH, SCHOOL OF ENGINEERING, UNIVERSITY OF WARWICK, UK

 

2-REPACKAGING: AN OPPORTUNITY FOR ENVIRONMENTALLY CONSCIOUS MANUFACTURERS(IJECDM, Vol. 11, No. 4, 2003-04)TAYLOR RICH, US AIR FORCESUDARATANAWONGWERAGIAT, BRAD GATES, JULIE ANN STUART*, PURDUE UNIVERSITY*Contact author: Purdue University, School of Industrial Engineering,Grissom Hall Room 258, 315 N. Grant Street, West Lafayette, IN 47907-2023; stuart@purdue.edu

 

3-AIR POLLUTION FROM IGNITED AND UNIGNITED ACID GAS FLARES IN QATAR(IJECDM, Vol. 12, No. 3 2004)O. BADR*, R. AL-KUWARI, AND A. ABDEL-SATTARMECHANICAL ENGINEERING DEPARTMENT,QATAR UNIVERSITY,DOHA, P.O. BOX 2713 QATAR, EMAIL BADR@QU.EDU.QA

 

4-THE DEVELOPMENT AND ANALYSIS OF AN ENVIRONMENT FRIENDLY MACHINING FLUID APPLICATION SYSTEM(IJECDM, Vol. 12, No. 3, 2004)Richard N. Callahan, Southwest Missouri State University, Email: rnc232f@smsu.eduKevin M. Hubbard, Southern Illinois University Edwardsville, Email: khubbar@siue.edu

 

5-A uniform environmental metric based on exergy for early design evaluation (IJECDM, Vol 13, no. 2, (2007), Eric Coatanéa, Markku Kuuva, Harri Nordlund, Petri E. Makkonen and Tanja Saarelainen, Machine Design Division, Helsinki University of Technology, PO Box 4100, FIN 02015 HUT, Finland

 

6- INTEGRATING ECO-COMPASS CONCEPT INTO INTEGRATED PRODUCT AND PROCESS DEVELOPMENT, PINGTAO YAN, MENGCHU ZHOU, DONALD SEBASTIAN* , AND REGGIE CAUDILL**, DEPARTMENT OF ELECTRICAL AND COMPUTER ENGINEERING, * CENTER FOR MANUFACTURING SYSTEMS, **MULTI-LIFECYCLE ENGINEERING RESEARCH CENTER, NEW JERSEY INSTITUTE OF TECHNOLOGY, NEWARK, NJ 07102-1982 U.S.A., vol 10, no.3, (2201-2002)

 

7-DETERMINING THE FEASIBILITY OF USING A STANDARDIZED INVENTORY DATABASE FOR CALCULATING ENVIRONMENTAL IMPACT OF PRODUCTS, JONATHAN D. LINTON, DEPARTMENT OF MANAGEMENTPOLYTECHNIC UNIVERSITY, 401C DIBNER, SIX METROTECH CENTERBROOKLYN, NY 11201, vol 10, no. 3, (2001-2002)

 

8-THE NOPALINE SYNTHASE PROMOTER AS A MODEL SYSTEM FOR STUDYING PLANT RESPONSE TO UV-B GYUNG-HEE YU AND GYNHEUNGAN, DEPARTMENT OF LIFE SCIENCE, POHANG UNIVERSITY OF SCIENCE AND TECHNOLOGY, POHANG, REPUBLIC OF KOREA 790-784CORRESPONDING AUTHOR: GYNHEUNGAN, DEPARTMENT OF LIFE SCIENCE. POHANG UNIVERSITY OF SCIENCE AND TECHNOLOGYPOHANG, REPUBLIC OF KOREA 790-784, vol 10, no. 3, (2001-2002)

 

9-INFLUENCE OF HOT MELT ADHESIVE CONTAMINANTS ON THE MECHANICAL PROPERTIES OF RECOMPOUNDED THERMOPLASTICSInternational Journal of Environmentally Conscious Design & Manufacturing, Vol. 10, No. 4, 2001, T. FORSS AND M. PUIDE, DEPARTMENT OF POLYMER TECHNOLOGY, ROYAL INSTITUTE OF TECHNOLOGY, S-100 44, STOCKHOLM, SWEDEN, B. TERSELIUS*, KRISTIANSTAD UNIVERSITY, SCHOOL OF ENGINEERING, S-291 88 KRISTIANSTAD, SWEDEN* TO WHOM CORRESPONDENCE SHOULD BE ADDRESSED, vol 10, no. 4, (2001-2002)

 

10-A SIMULATION STUDY ON TELEPHONE REMANUFACTURING PROCESSES, JUN-GYU KANG, GEORGES KRAFTSIK*, DONG-HO LEE**, AND PAUL XIROUCHAKIS, Department of Mechanical Engineering, Swiss Federal Institute of Technology at Lausanne (EPFL), Lausanne, CH-1015, SWITZERLAND, vol 10, no. 4, (2001-2002)

 

11-ENHANCED STEAM CONDENSATION AS A RESULT OF HEAT TRANSFER ADDITIVES, AARON STONE AND ARSALAN RAZANI, ENERGY, LABORATORY, MECHANICAL ENGINEERING DEPARTMENT, THE UNIVERSITY OF NEW MEXICO, ALBUQUERQUE, NM 87131 AND, KWANG J. KIM*, AND JASON PAQUETTE, MECHANICAL ENGINEERING DEPARTMENT UNIVERSITY OF NEVADA, RENO, NV 89557*CORRESPONDING AUTHOR, vol. 10, no. 4, (2001-2002)

 

12-ELECTRICAL AND THERMAL ANALYSIS OF AN ENVIRONMENTALLY SAFE MICROPROCESSOR-BASED, International Journal of Environmentally Conscious Design & Manufacturing, Vol. 11, No. 1, 2003, Printed in the U.S.A.NI-CD FAST BATTERY CHARGER, MASOUM, M.A.S., DEPARTMENT OF ELECTRICAL ENGR., IRAN UNIVERSITY OF SCIENCE & TECHNOLOGYTEHRAN, IRAN, GHASSEMI, MAJID, DEPARTMENT OF MECHANICAL ENGR., K.N. TOOSI UNIVERSITY, TEHRAN, IRAN

 

 

13-A STUDY ON CALCIUM FLUORIDE AS A SOLID LUBRICANT IN, GRINDING, International Journal of Environmentally Conscious Design &, Manufacturing, Vol. 11, No. 1, 2003, S. SHAJI+, V. RADHAKRISHNAN∗DEPARTMENT OF MECHANICAL ENGINEERING, INDIAN INSTITUTE OF TECHNOLOGY - MADRAS, CHENNAI, INDIA - 600 036.

 

14-INTEGRATION OF GREEN QUALITY FUNCTION DEPLOYMENT AND FUZZY MULTI-ATTRIBUTE UTILITY THEORY-BASED COST ESTIMATION FOR ENVIRONMENTALLY CONSCIOUS PRODUCT DEVELOPMENTInternational Journal of Environmentally Conscious Design & Manufacturing, Vol. 11, No. 1, 2003, CHENSONG DONG, CHUCK ZHANG* AND BEN WANG, DEPARTMENT OF INDUSTRIAL ENGINEERING, FLORIDA A&M UNIVERSITY-FLORIDA STATE UNIVERSITY, 2525 POTTSDAMER STREET, TALLAHASSEE, FL 32310-6046, * CORRESPONDING AUTHOR

Document